Sanding Interlux Brightsides

Hi all,

Does anyone have thoughts on whether sanding large flat surfaces between applications of Brightsides coats with a low speed ROS and 400 grit is acceptable (as opposed to sanding the entire boat by hand)?



1 reply:

« Previous Post       List of Posts       Next Post »

RE: Sanding Interlux Brightsides

   I used my Festool ROS at 1 in several places with 320 grit. Just stay away from the edges and corners and you'll be fine with a very light touch.

« Previous Post     List of Posts     Next Post »

Please login or register to post a reply.