Builders' Forum Archives |
Re: Second try on image
Posted by Doug Judd on Mar 11, 2005
I agree with Ken. My CH16 panels weren't quite as far out of line as your photo indicates, so I was able to plane and wood rasp mine into submission.
I would extend a light pencil guideline, cut it a bit proud with a pullsaw, and clean it up with a rasp and/or plane. Just take it slow and easy. Remember, you're going to radius the ends anyway.
In Response to: Re: Second try on image by Ken Leffert on Mar 11, 2005
Replies:
- No big deal by Howard on Mar 11, 2005
- On further investigation. by Ken Leffert on Mar 11, 2005