Re: Weave still showing

Posted by Steve Miller on Apr 28, 2004

Epoxy coats every thing. Each little peak and valley in the weave. After 3 coats the glass is covered but you can still see the weave pattern. Thats perfectly normal. Time for sanding. Sand the thing smooth until no little shiney dots show - the valleys from your weave texture. I find that I sometimes need a 4th coat after all that sanding. That should just need a prep sanding for paint.

Your second question - no paint will not hide it. Unless you paint and sand (and paint and sand and paint and sand......) until you have a bunch of painted dots than means you finally filled in the valleys with paint.

Better to do it with epoxy.

Cheers, you are almost done!

In Response to: Re: Weave still showing by Chris on Apr 28, 2004

Replies:

• Re: Weave still showing by Kyle Welch on Apr 29, 2004