Builders' Forum Archives |
Re: shear clamps
Posted by Hank H on Aug 21, 2005
thanks, that's what I thought. One other thing on one of my bulkheads, it is seated snugly in the hull and to the shear clamps. but when I planed that part of the clamp down to the hull and to the right radius it is still about 1/8 to 1/4" lower than the top of the hull. Will this make much of a difference when attaching the hull. If you hadn't noticed this boat is kicking my butt. Thanx
In Response to: Re: shear clamps by LeeG on Aug 21, 2005
Replies:
- Re: shear clamps by craig on Aug 21, 2005
- Re: shear clamps by Hank H on Aug 22, 2005