Builders' Forum Archives |
Re: finishing rigging end
Posted by LeeG on Oct 9, 2004
use electrical tape, dab with silicone, heatshrink tubing,,,or roll the braided covering back, cut the core, bring the covering over the cut end and carefully heat/melt the covering into a nub over the core.
In Response to: finishing rigging ends by Mischa on Oct 9, 2004
Replies:
- Re: finishing rigging end by Howard on Oct 9, 2004
- Re: finishing rigging end by Kurt Maurer on Oct 9, 2004
-
Howard - some qustions by Mischa on Oct 10, 2004
- Re: Howard - some answers by Howard on Oct 10, 2004