Builders' Forum Archives |
Re: securing hatch covers
Posted by LeeG on Aug 12, 2004
stainless machine screw, finish washer,washers, locknut. Locknut will not rotate loose with pivoting tab. I've cut out a piece of 6mil plastic to act as a thin washer between the varnished/epoxied 4mmokoume tab and deck.
In Response to: Re: securing hatch covers by FrankP on Aug 12, 2004
Replies:
- Re: securing hatch covers by FrankP on Aug 12, 2004
- Re: securing hatch covers by Mischa on Aug 15, 2004