Re: Another MC16.5 questi

Posted by Kelly Smith on Aug 7, 2004

I'm at the same point in my MC16.5, I planed the 24' from the front bulkhead to the stem and planned to do the 30" from forward hanging knee to the stern with the rolling bevel between the forward hanging knee and the front bulkhead (per the instructions). Two problems: 1. How do you use the 30" guide in the middle of the boat where the beam is too wide (make another guide?). 2. The 30" seems pretty steep for the side decks where they are going from the carlin to the sheer clamp. My thought is just to do a rolling bevel from bulkhead to bulkhead (i.e. 30" to 24"). Does that make any sense? Cheers, Kelly

In Response to: Re: Another MC16.5 questi by David Wallace on Aug 2, 2004


No Replies.


57 minutes

left in the Storewide Sale!