Builders' Forum Archives |
Bulkhead space to hull...
Posted by Karl on Jul 5, 2004
Ok, another fork in the road before I continue. I have placed both bulkheads according to the plans. They fit nice and snug, but there is a bit of space from the bottom of the bulkhead to the hull. The aft bulkhead is worst running at 1/2 inch, the for is running about 1/3 inch to the hull.
How would I go about fixing this to ensure a closer space before I start sealing?
Thanks!
Karl
Replies:
- Re: Bulkhead space to hul by Chris Taylor on Jul 6, 2004
-
Re: Bulkhead space to hul by Karl on Jul 6, 2004
- Re: Bulkhead space to hul by Doug Judd on Jul 6, 2004
- Re: Bulkhead space to hul by Mike on Jul 9, 2004
- Re: Bulkhead space to hul by Doug Judd on Jul 6, 2004
-
Re: Bulkhead space to hul by Karl on Jul 6, 2004