Re: repair varnish checki

Posted by Steve Miller on May 31, 2004

What does "all the way to the epoxy mean"? Are you sure the cracks do not extend into the varnish? Can you feel them with a finger nail before sanding varnish? Maybe the cracks are in the epoxy not the varnish. Is there a pattern to them? Too much stress at one point? Too rapid temp change? Like the sun hitting a really cold yak?

Sand until the cracks are gone. Re-epoxy or glass as needed. Revarnish. Check by wetting the sanded area to see if the cracks still show.

I would want them gone just for the piece of mind.

In Response to: repair varnish checking? by Tom Creeley on May 31, 2004


No Replies.