epoxy fill coats

Posted by Garagegirl on May 15, 2004

Help! I have 4 rolled coats of epoxy on my ches 16. Still have rise from where glass comes off deck to hull, at bow and stern and on deck where directions were to overlap the glass. This may take forever to fill, and rolling evenly distributes, so I don't know how it will ever fill enough to be evenly sanded to prepare for varnishing. How have others worked this? GG

Replies:

• Re: epoxy fill coats by RogerJ on May 15, 2004
  • Re: epoxy fill coats by Steve Miller on May 15, 2004
    • Re: epoxy fill coats by Bill Cooke on May 15, 2004
  • Re: epoxy fill coats by Garagegirl on May 16, 2004
• Only where it's needed... by John in Dallas on May 15, 2004
• Re: epoxy fill coats by Kurt Maurer on May 15, 2004
• Re: epoxy fill coats by Chris on May 16, 2004
• Re: epoxy fill coats by Garagegirl on May 22, 2004