Title: Last Post By: Posts:
More epoxy to fill the weave ok? John Cornellier » Wed, 5/10/17 » 5:26 PM 12
Brightsides in Wet Locations Jeff D » Tue, 5/9/17 » 3:30 PM 1
My NE Dory...Finished! Mikeflys » Mon, 5/8/17 » 3:56 PM 13
OkoumeFest 2017 Seminar Schedule John, CLC » Mon, 5/8/17 » 3:47 PM 1
NE Dory Epoxy Challenges John, CLC » Mon, 5/8/17 » 12:03 PM 3
Sanding the weave after first epoxy coat. Anthony B » Mon, 5/8/17 » 8:18 AM 1
Sanding weave afer fit epxoy coat. Anthony B » Mon, 5/8/17 » 8:16 AM 2
how round should my mast be? Birch2 » Sun, 5/7/17 » 9:17 PM 5
Changing the center console on peeler JEC » Sun, 5/7/17 » 8:30 PM 1
Laser Friendly Plywood for Boat Building joshpit2003 » Sun, 5/7/17 » 6:55 PM 10
Reef Points Mikeflys » Sun, 5/7/17 » 6:01 PM 6
filling the weave on the teardrop riverron » Sat, 5/6/17 » 6:23 PM 2
Electrical set up Mkcagle » Fri, 5/5/17 » 10:56 AM 2
Building oars Flactem » Fri, 5/5/17 » 7:29 AM 7
NE Dory George C » Thu, 5/4/17 » 11:17 PM 3
Bridges of cloth at the chine - Ganymede 13' Alexandre » Thu, 5/4/17 » 11:12 PM 7
Installing a Seat Bri C » Thu, 5/4/17 » 1:16 PM 1
bright lines left on teardrop hull made by the... Linscott83 » Thu, 5/4/17 » 8:21 AM 4
using West Systems 410 Microlight Fairing Filler pastor art » Thu, 5/4/17 » 7:48 AM 3
Over Sanding Proavocateur » Thu, 5/4/17 » 12:00 AM 2
Shearwater Plans jshaley » Wed, 5/3/17 » 8:57 AM 6
best practices for cutting plywood from a pattern Proavocateur » Wed, 5/3/17 » 12:54 AM 4
Dory oarlock modified Jacardan2 » Tue, 5/2/17 » 8:17 PM 7
seat back installation - WDD wookie » Tue, 5/2/17 » 5:21 PM 1
bungee knot HikeAZ » Tue, 5/2/17 » 9:34 AM 1
Varnish Technique Birch2 » Mon, 5/1/17 » 11:55 AM 2
Sweat on the deck Bri C » Sun, 4/30/17 » 2:57 PM 1
router advice sought spclark » Sat, 4/29/17 » 1:27 PM 13
stitch holes not being filled by epoxy roller Birch2 » Fri, 4/28/17 » 10:27 PM 2
Varnish issues Laszlo » Fri, 4/28/17 » 6:23 PM 8

<< prev    [311-340]  [341-370]  [371-400]  [401-430]  [431-460]  [461-490]  [491-520]   next >>