Block Plane - Low Angle by Stanley 1-3/8

Block Plane - Low Angle by Stanley 1-3/8" x 6"

All boatbuilders need a block plane in their toolbox. They are used for cutting scarfs, trimming off a bit of wood here and there, and shaping all manner of parts. We couldn't imagine building a boat, even from a kit, without a sharp block plane....

$35.25

Shinto Saw Rasp 9

Shinto Saw Rasp 9"

Shinto Saw Rasps are manufactured from high quality saw blades with coarse teeth on one side (11 per inch) and fine teeth on the other (25 per inch). Because of the saw tooth design, clogging is eliminated. Use the coarse side for shaping and...

$26.99

Japanese Saw 9-1/2

Japanese Saw 9-1/2"

Japanese (Ryoba) Razor Saws cut on the pull stroke. They leave a very thin kerf and are razor sharp---special tempering helps these saws keep their edge for a long time. We find that they cut faster and more accurately than even the finest western...

$28.50

Bonsai Saw

Bonsai Saw

Originally designed to trim bonsai trees. Ideal for cutting precise curves, making it perfect for cutting hatch openings, trimming cockpits, and reaching tight places. It might even replace your expensive saber saw.  - Ebony Handle

$17.49

Hobbyist's Drill w/Fine drill bit

Hobbyist's Drill w/Fine drill bit

This hobbyist's drill is handy for building CLC's scale model kits. The steel pin vise has a chuck capacity of .25 to 1.14 mm (.01"-.045"). Holds wire, rod, drills, taps, reamers and other small tools. Can be used in stationary drill press...

$11.91

Beading Saw with Woodpecker Tooth  6

Beading Saw with Woodpecker Tooth 6"

These saws are designed for fast, accurate cuts. Since the rigid spline is not full length of the blade, the blade can easily make long, accurate cuts in thin material.  A unique feature of the 6˝ Beading Saw is the special "woodpecker"...

$26.25

Flexi-Tips for CA Glue

Flexi-Tips for CA Glue

Flexi-Tips allow for more precision in application of CA Glue. Package contains 24 disposable tips, to be used with the EZ-Bond CA Glue and Accelerator.   - Creates smaller drops  - Extends into hard-to-reach areas  - Maximum...

$4.89

Spokeshave by Stanley

Spokeshave by Stanley

Spokeshaves are almost essential for making paddles and very handy for cleaning up the insides of sea kayak cockpits. They work much like a block plane, but can be used on tight curves.  This tool is easy to adjust, well made and reasonably...

$21.75

Dove Tail Saw   6 1/4

Dove Tail Saw 6 1/4"

The 6¼˝ Dovetail Saw (Dozuki) for Hardwoods has 36 teeth per inch. With a rigid spline, it is designed for a variety of joinery cuts in small sized hardwoods, and like all Japanese saws, it cuts on the pull stroke. The blade thickness...

$22.84

Riffler Rasp - 8 piece set

Riffler Rasp - 8 piece set

Set of 8" Riffler Rasps are used to carve, cut and shape. They can work from above, below, around and inside - virtually any part of the workpiece. Their sharp hardened teeth will cut cleanly into the wood surface leaving a free, open grain....

$18.75

Waterstone

Waterstone

This combination waterstone is easy to use and will put a razor edge on plane irons, chisels, and other tools. 6000-grit on one side, and 1000-grit on the other. See our ShopTip on how to sharpen your boatbuilding tools.

$29.24

Sliding T-Bevel

Sliding T-Bevel

Sliding T-bevels are one of the boatbuilder’s most useful tools. They are used for determining bevels and for transferring angles from one piece of wood to another. They are essential for setting angles on power tools and machinery. Made...

$10.50

Draw Knife - 5

Draw Knife - 5"

An essential tool for building the CLC Wooden Oars from plans and patterns.  This draw knife has a working edge of five inches and is designed to flex slightly around contours.  Perfect when large amounts of stock need to be removed...

$34.27

Super-hard Milled Scraper (set of 4)

Super-hard Milled Scraper (set of 4)

A true craftsman's tool. Use scrapers to mow down uneven epoxy without resorting to the sander. Or treat bare wood prior to finishing for improved grain figure beneath epoxy or varnish. These hardened scrapers are made from the finest European...

$14.24

Sanding Block

Sanding Block

A rubber sanding block is a tool that you'll find in every boatbuilding shop.  The durable rubber pad conforms to the curve of the hull, can be used with wet or dry sandpaper, and makes changing paper a snap.

$2.99

3M Adhesive Backed Sandpaper Sheet Roll 2-3/4

3M Adhesive Backed Sandpaper Sheet Roll 2-3/4"

A peculiar product that seems to be available only to professional boatbuilding shops.  We've always had a couple of rolls of this sticky-back paper in our shop, which can be used with flexible fairing boards, hand file boards, soft and...

from $66.63

Foam Sanding Handblock

Foam Sanding Handblock

3M Stikit Hand Blocks are made of sturdy, durable, high-strength material and are shaped to provide maximum user comfort and control while sanding. Using a hand block eliminates finger pressure marks in the finish by providing even distribution of...

$23.51

3M 6000 Series Respirator with HEPA Filters

3M 6000 Series Respirator with HEPA Filters

The 3M™ 6000 Series reusable respirator offers users comfort and convenience - coupled with cost savings. Each face piece is remarkably comfortable, soft, lightweight and easy to adjust. NIOSH approved for negative pressure air purifying and...

$27.43

3M 6001 Organic Vapor Cartridge Set

3M 6001 Organic Vapor Cartridge Set

Paint Spray Cartridges 3M 6001 Organic Vapor Cartridge To be used with 3M 6000 and 7000 Series Half Face and Full Face Respirators with bayonet attachments. The 6001 is NIOSH approved for certain organic vapors. Whenever we are applying a coat of...

$14.69

Hearing Protectors

Hearing Protectors

E-A-R Model 4000 hearing protectors cut off 27 decibels from your sander's whine and offer outstanding comfort at a very reasonable price. Soft and wide earmuff cushions distribute pressure evenly, and vertical adjustment on the head band allows...

$14.55

Canvas Tool Bag with Leather Trim

Canvas Tool Bag with Leather Trim

The Canvas Rigger's Tool Bag is a heavy duty, 24 oz. canvas bag with leather trim, ideal for DIY boatbuilders. Vertical stitching and 24 oz. 100% cotton canvas gives this bag its "Standup Straight Posture" which puts your tools in easy reach....

$34.29

Stanley Sweetheart Low Angle Block Plane 60-1/2

Stanley Sweetheart Low Angle Block Plane 60-1/2

A Stanley Tradition since 1843 -- Stanley reintroduces their Sweet Heart logo with a new line of premium hand planes. If you're a woodworker, finding an old Stanley tool with their Sweet Heart logo is like finding a treasure, and many consider...

$78.74

Rabbeting Bits for LapStitch Boats

Rabbeting Bits for LapStitch Boats

Industrial quality carbide router bits for cutting rabbets in the LapStitch™ Sassafras, Skerry, Eastport Pram, Annapolis Wherry, and Northeaster Dory designs.  Solid steel bodies are precision machined to carefully controlled...

$38.99

Flush Trim Router Bit

Flush Trim Router Bit

The anti-kickback design of these industrial quality carbide router bits limits stock feed rate for safer router operations. Solid steel bodies are precision machined to carefully controlled tolerances. A final CNC machine 600 grit wet grind on...

$11.99

Bead & Flute Router Bit Set

Bead & Flute Router Bit Set

Includes 1/4" Bead Cutter and 1/4" Cove Cutter.The anti-kickback design of these industrial quality carbide router bits limits stock feed rate for safer router operations.  Solid steel bodies are precision machined to carefully controlled...

$33.74

Round Over Router Bit

Round Over Router Bit

The anti-kickback design of these industrial quality carbide router bits limits stock feed rate for safer router operations. Solid steel bodies are precision machined to carefully controlled tolerances. A final CNC machine 400 grit wet grind on...

$15.74

CLC Tool Box Kit

CLC Tool Box Kit

The CLC Tool Box is the boatbuilder's interpretation of the classic "tab-and-slot" type, favored by woodworkers for its ease of assembly and flexibility. As the name suggests, the tool box goes together with mortise-and-tenon joints, with two...

$60.00

Epoxy, Glue, and Acid Brushes (12 pack)

Epoxy, Glue, and Acid Brushes (12 pack)

These natural bristle brushes have crimped metal handles. Use for gluing, pasting, soldering, or acid application. Disposable and perfect when one-time usage is necessary. 1/2" brush with overall length of 6". These glue brushes are useful in a...

$3.91