Re: leaky boat

Posted by craig on Sep 20, 2007

To me, a lot of it looks like the varnish did not cure, or did not adhere to the epoxy well. If you glassed the boat with a single piece of cloth, it looks like you sanded through the glass at the joint in the panels. Did you sand the finish before the first coat of varnish? If not you may have to strip the finish completely off, sand it and refinish it.You may be able to find the leak by filling the boat with water and see where it comes out.

In Response to: Re: leaky boat by Chris J. on Sep 20, 2007

Replies:

No Replies.