Re: panel joints, epoxy

Posted by Jim Robinson on Sep 28, 2005

I did a similar thing with my Millcreek, I mixed resin with resin (no hardener). Needless to say it didn't harden. I also found the bond not too good after that, so I strengthened it with a piece of scrap wood glued to the backside of the joint. I was afraid it would affect the shape when stiched but it didn't. The hull is painted and looks fine now.

In Response to: Re: panel joints, epoxy by CLC on Sep 24, 2005


No Replies.


Special Financing with Blispay

 CLC's Fall Kit Sale