Builders' Forum Archives
Re: Help w. CH16 deck ins
Posted by Doug Judd on May 26, 2004
Mac's suggestion for blocks at the bulkhead is a good one. I also used blocking over the sheer clamps to apply the downward tension there instead of at the overhang.
Someone suggested cutting notches in the overhang to within a 1/2", or so, of the hull at the tape or strap intervals. Personally, I think using the blocks is easier.
In Response to: Re: Help w. CH16 deck ins by Kyle T on May 26, 2004
- Re: Help w. CH16 deck ins by Chris Taylor on May 26, 2004