Gluzilla by MAS Epoxies

Ordering Options:

Price: $23.99

Quantity:  

Gluzilla is an easy-to-use, translucent paste epoxy from MAS Epoxies.

  • Fast Curing, translucent paste epoxy with unlimited bonding, sealing and filling applications.
  • For use by professionals, homeowners and DIY Hobbyists.
  • Formulated with a viscosity like vaseline to be extremely versatile, flexible and resilient with enormous strength.
  • Easy to work with and won’t drip or sag when used overhead or on vertical surfaces.
  • Demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
  • After cure, Gluzilla can be painted, drilled, machined, sanded, filed, tapped or sawn.

Suggested Uses:

  • As an Adhesive: Wood, Metal (all types), Glass, Brick, Block, Concrete, Stone, Slate, Fiberglass, Tile and other substances.
  • As a Sealant: Oil, Water and Pressure Tanks, Cellar
    Cracks, Plumbing Leaks and much more.
  • As a Filler: Holes, Castings, Patterns, Molds, Voids, Welds, Steering Wheels and much more.
  • Please note that Gluzilla will not bond to wax paper, Teflon, Polythylene and some other plastics. There are thousands of plastic combinations. When in doubt, test a small area.

Application Tips:

  • Apply Gluzilla in your desired thickness to both prepared surfaces to be bonded and bring them together firmly. Ensure that plenty of Gluzilla remains between the contact surfaces.
  • Use screen wire or fiberglass cloth to reinforce large voids or gaps. To smooth out work, use lacquer thinner or denatured alcohol.
  • Gluzilla mixes better at 80°F than 40°F. In cold or cool temperatures, place container near a heat source, but use caution to heat up slowly and consistently.

Preparation and Mixing Tips:

  • Prepare a clean, flat working surface for mixing and working with the Epoxy.
  • Clean and prepare the surfaces to be bonded. (Bio-Solv is great for surface prep and leaves no film.)
  • Insert the Epoxy cartridges into any caulking gun when ready to use.
  • Open the Epoxy by removing the collar and nozzle plug.
  • To use the static injector (1 included) remove the collar and nozzle plug. Insert the nozzle into the collar and attach to cartridge.
  • When not using the Static Injector, use a small putty knife or flexible artist spatula to mix, apply and sculpt.

* International Customers: we do not ship this product outside the US.

* Alaska & Hawaii: we are unable to ship this product outside the lower 48 states.