 |
||||
 |
 |
 |
 |
 |
| Title: | Last Post By: | Posts: |
|---|---|---|
| Jimmy Skiff I foredeck question | Tommywass » Sat, 3/20/21 » 1:19 PM | 8 |
| Looks like BLBF is back! | spclark » Sat, 3/20/21 » 10:53 AM | 4 |
| Padeye for towing Passagemaker Dinghy | Jamie T » Sat, 3/20/21 » 10:27 AM | 10 |
| Sand or Scotch Brite? | Mark N » Thu, 3/18/21 » 8:10 AM | 4 |
| very small batches of epoxy | Gramps » Thu, 3/18/21 » 6:55 AM | 9 |
| Propane heat for Epoxy | Chenier » Wed, 3/17/21 » 6:35 AM | 8 |
| rounding edges | Elliot1234 » Tue, 3/16/21 » 9:57 PM | 21 |
| aluminum sacrilege | Tornado Jim » Tue, 3/16/21 » 3:39 PM | 6 |
| Detail scraper | JohninSD » Tue, 3/16/21 » 3:35 PM | 0 |
| Pinholes in resin filled with sanded [white] resin | hspira » Mon, 3/15/21 » 11:32 PM | 2 |
| Sheer clamp radius at rear of Shearwater 17 Hybrid | spclark » Mon, 3/15/21 » 10:22 PM | 7 |
| Epoxy | Shearwater hybrid builder » Mon, 3/15/21 » 8:14 PM | 17 |
| Skerry - aft seat fit - strange "stepped" pattern | wookmaster » Mon, 3/15/21 » 5:12 PM | 2 |
| Easiest Kayak To Build | Wolfe1959 » Mon, 3/15/21 » 4:48 PM | 2 |
| Cockpit paint for mill creek 16.5 | SteveE914 » Mon, 3/15/21 » 4:13 PM | 2 |
| Mizzen on a Skerry? | Marine Varnisher » Mon, 3/15/21 » 1:15 PM | 4 |
| bottom panel sticks out from joined side panels... | hspira » Sun, 3/14/21 » 9:52 AM | 2 |
| Making a heated tent for curing sheer clamp to... | Shearwater hybrid builder » Sun, 3/14/21 » 8:29 AM | 6 |
| epoxying/varnishing timing | Andrew G » Sat, 3/13/21 » 4:01 PM | 7 |
| Wood filler question | Ripp » Fri, 3/12/21 » 6:22 PM | 6 |
<< prev [1251-1270] [1271-1290] [1291-1310] [1311-1330] [1331-1350] [1351-1370] [1371-1390] next >>
