Title: | Last Post By: | Posts: |
---|---|---|
Keel strips and refinish | PatrickAngus » Sun, 4/25/21 » 3:49 PM | 2 |
How to remove excessive epoxy fillets | DU PONT, ERIC » Sun, 4/25/21 » 12:07 PM | 2 |
Rudder installation questions (Eastport Pram) | JHR1963 » Sun, 4/25/21 » 8:58 AM | 8 |
Recutting the cockpit hole?? | esimoneau » Sat, 4/24/21 » 12:37 PM | 2 |
Skerry - to primer hull or not to primer hull | Autonomous » Sat, 4/24/21 » 12:28 AM | 1 |
my Skerry scale model | rogwei » Fri, 4/23/21 » 11:44 PM | 2 |
Wood Duck Gap in bottom panels at Hull Forms | MANLEY, MARK » Fri, 4/23/21 » 8:01 PM | 2 |
Brass Padeye Location | samuelsjohns » Fri, 4/23/21 » 4:23 PM | 0 |
using CA glue | Marc Jalbert » Fri, 4/23/21 » 1:28 PM | 3 |
Filleting at flat joints; removing wires | Mark N » Fri, 4/23/21 » 12:30 PM | 1 |
Has anyone built a Chesapeake light craft... | Laszlo » Thu, 4/22/21 » 8:58 PM | 1 |
Jimmy skiff question - forward bulkhead | ariel » Thu, 4/22/21 » 5:38 PM | 0 |
Thinning Epoxy/Resin | Dick Dowdell » Thu, 4/22/21 » 4:18 PM | 4 |
Supply List for Kit Builders questions | DustinB » Thu, 4/22/21 » 3:36 PM | 7 |
Tragedy! Blending scratch repair?? | Grumpy » Wed, 4/21/21 » 7:22 PM | 2 |
Epoxying the bolts into the bulkheads of the... | Franschallhorn » Wed, 4/21/21 » 7:19 PM | 0 |
Planing sheer clamps: Radius guides for Mill... | AndrewLB » Wed, 4/21/21 » 1:47 PM | 1 |
Sanding prep for fiberglass & epoxy, cedar... | Wade B » Wed, 4/21/21 » 1:00 AM | 6 |
Dark kayak hull? | Laszlo » Tue, 4/20/21 » 9:33 AM | 2 |
CLC Peapod build | Autonomous » Sun, 4/18/21 » 2:38 PM | 45 |
<< prev [1196-1215] [1216-1235] [1236-1255] [1256-1275] [1276-1295] [1296-1315] [1316-1335] next >>