Builders' Forum |
|
↓ Scroll to Last Comment ↓ | Forum Guidelines | Builders' Forum | RSS |
Performance Back Band install questions CH16
I recently got around to installing the PBB into my CH16. But am not sure exactly how it is supposed to mount? I ran the two straps into the sheer clamps but not sure how the other two are mounted? pics would be super appreciated if available. Thank you, Frank
3 replies:
RE: Performance Back Band install questions CH16
on mine there are no bungies... just two long straps on each side, 4 total. thw two long ones i ran to the sheer clamp, but not sure how to run the other two. looks like they are made to clip to something, but not sure what or how...
RE: Performance Back Band install questions CH16
Sorry Frank,
That Back Band must mount differently from the nylon back band, which uses bungies to hold up the back.
Mike
RE: Performance Back Band install questions CH16
» Submitted by MikeFL - Tue, 6/5/12 » 8:32 AM
On my recently completed CH16 the back band straps on mounted on the shear clamps like yours, and the bungie is threaded through two bungie clamps mounted on the underside of the coaming behind the seat. But be very careful drilling the holes. I missed and came through the deck on one.
I would post a pic if I could figure out how.
Mike