Re: Sander discs

Posted by John Beck on May 23, 2007

Garland, a ROM seems like overkill for sanding between coats. I put powered sanders away before the first finish coat of varnish or paint and do hand sanding for all finish work. I have found 220 is plenty fine for between coats. I use 3M gray scotch bright intended for sanding between coats with good success to knock off the gloss without removing much finish and it's easier to control along the chine and keel. The scotch bright doesn't clog like 220 grit paper does.

Good luck, John

In Response to: Sander discs by Garland Gray on May 23, 2007



Follow us on Instagram: @clcboats & @clcteardrop