Re: chesapeake 17

Posted by Rick on Nov 4, 2005

To avoid the "gap" you need to trim the edges of the deck pieces to within an inch, 1/2 inch of the hull you are attaching to. That will help keep the deck in contact with the deck beam and bulkheads. Dry fit mark the cut. I used tie down straps at the deck beam and bulkheads then packing tape. It did look like a mummy.

In Response to: Re: chesapeake 17 by clark tuttle on Nov 4, 2005


No Replies.


Follow us on Instagram: @clcboats & @clcteardrop