Re: Planing scarf joints

Posted by RogerJ on Sep 26, 2005

I think Gougeon Bros. (West Systems Epoxy) offered a scarffing jig for use with a circular saw. It was limited to about 3/8" total thickness I think. I did mine with a freshly sharpened low angle block plane, I'd do the same again, for the thin ply we use for kayaks. RogerJ

In Response to: Re: Planing scarf joints by don on Sep 26, 2005


No Replies.


Follow us on Instagram: @clcboats & @clcteardrop