Roasted Minicell

Posted by Mac on Apr 21, 2005

Hi All,

I mentioned a while back that I was going to experiment with a 1350 Watt heat gun on Minicell seats.

Just did, worked great on seats carved with a Stanley curved scraper and "dressed" with 80 grit sandpaper. I wound up with a dull grey matted terry cloth look - which is OK too.

For fun, and after a lot of experimentation on scraps, I glazed the surface with the gun. It doesn't change the shape, but gives it a gunmetal grey sheen.

Word of caution - you don't see the burn comming, so keep the gun moving!!!

Best to all.



No Replies.


Follow us on Instagram: @clcboats & @clcteardrop