Re: Wet Sanding

Posted by Mac on Apr 6, 2005

The hull, after wet sanding should be thoroughly rinsed with clean water and a towel that hasn't been washed or dried in fabric softener. Then the hull can be dried with another non-fabric softener towel or paper towels. Then you're good to go. Approx 30 minutes all told?

I can wet sand, rinse, dry and recoat in about 45 minutes before I go to work in the morning. This leaves the boat quiet during the day - less dust.

Depending on your cliamte, you MAY get away with another coat after 12hrs - but don't rush it, I prefer 24hrs.

Good luck!


In Response to: Re: Wet Sanding by Paul on Apr 6, 2005


No Replies.


Follow us on Instagram: @clcboats & @clcteardrop