Re: Sanding tips

Posted by Dave Houser on Feb 22, 2005

I agree with Mac. For the best finish it is fairing boards. I 80-grit ROS sand the epoxy until all of the shiny dimples are gone. If I have touched glass I spot fill coat the lows (the shiny spots that will not go away without sanding into the adjacent glass) and then add a complete fill coat and sand with a fairing board. It is extra effort but it eliminates the ROS waves in the final finish.

In Response to: Re: Sanding tips by terry on Feb 22, 2005



Follow us on Instagram: @clcboats & @clcteardrop