Re: Epoxy Not Curing?

Posted by CLC on Feb 17, 2005

>>>>>>If it really is still soft or tacky then a heat gun will get it off really fast with an old putty knife. The heat gun will just bubble the uncured stuff off. Hold the heat gun about 12" - 14" away from the work so you do not scorch the boat. The clean up will be faster and easier than you are expecting. You can scrape and heat in one motion working down the boat.


I concur with Steve. If it's just select spots, as in Mr. Zeidler's case, prising of the bad goo with heat gun and scraper will probably be the quickest way out.

In Response to: Re: Epoxy Not Curing? by Steve Miller on Feb 17, 2005


No Replies.


Follow us on Instagram: @clcboats & @clcteardrop