Boatbuilding Supplies » Paint & Varnish |
These are the same high-quality marine primer, paint, and varnish products we use on the Chesapeake Light Craft fleet!
This is what we use to varnish CLC's fleet. The easiest varnish on the market to apply, but brings up a lovely deep amber gloss over epoxy and/or wood. Schooner® combines the very best of classic varnish chemistry to create a high gloss finish...
$38.00
Prekote® is a unique under coater for use with Brightside® Polyurethane or any one-part topside finish. Simply roll 2 coats on top of sanded epoxy, sand smooth and apply the Brightside® color of your choice. Folks who visit our shop...
from $39.99
This one-part polyurethane paint is glossy, durable, and easy to use. Roll it on with a foam roller, tip it out with a brush, and everyone will think you’ve sprayed your hull. Brightsides paints contain Teflon® which makes it...
from $39.99
Interlux Goldspar Satin Varnish
A softer, satin gloss, especially popular for the interiors of open boats. It contains no UV protection, so it must be applied OVER Schooner Varnish so that your epoxy is adequately protected. Also used in cabin interiors and on home...
$38.00
Interlux Perfection - 2-Part High Gloss Marine Paint
Interlux Perfection is a high-gloss two-part polyurethane finish. Its high performance formula combines a long lasting abrasion and chemical resistant finish with protection from the detrimental effects of UV. Its abrasion resistance makes it...
from $100.89
New Colors Added! At last! Wood stain suitable for use with wood-epoxy composite boats. Click here for Nick Schade's tips on getting the most out of Behlen's Solar-Lux Stain. Solar-Lux Stain is a highly fade- and UV-resistant dye...
from $16.85
Interlux Primekote - Two-Part Primer
Epoxy Primekote is a multi-purpose two-part epoxy primer that is the recommended primer for use with two-part finishes such as Perfection® Polyurethane and can also be overcoated with any Interlux topside paint. It is also used as part of a...
$48.88
Denatured alcohol solvent, pure 100% denatured ethyl alcohol. We use this to clean surfaces prior to applying epoxy, paint, or varnish, and as a wipe-down between coats of epoxy, paint, or varnish. Also good for cleaning up tools and...
$10.99
Low odor, quick drying. May be added to oil base paints, enamels and varnishes for exterior and interior use to thin and control flow rate. Do not use with synthetic or rubber base enamels or water thinned paints....
$10.99
Bio-Solv is an environmentally friendly solvent that can be used in place of Acetone, Xylene, MEK, thinners and other petroleum-based solvents. It effectively cleans or prepares surfaces to be painted or epoxied, removes adhesives and cleans...
from $16.99
The StopLossBag™ allows you to preserve the fresh off-the-shelf quality of wood finishes. A specially formulated 3-ply construction helps prevent loss of solvents while a special gas barrier inhibits oxygen penetration into...
from $7.95
