Price: $





Item: Qty: Notes:
Block Plane - Low Angle by Stanley 1-3/8" x 6"
1
Bonsai Saw
1
ideal for cutting precise curves
Chip Brush - 2" Bristle Brush :: Chip (Bristle) Brush
6
for epoxy
Compass Rose (Round) Marquetry Inlay/Onlay Kit
1
check out clcboats.com for a complete selection of inlay/onlay designs
Disposable Nitrile Gloves - Box of 100
1
Epoxy Mixing Cups - Quart :: Mix 'n Measure Cup Qt. Single
10
Epoxy Syringe
3
Fillet Tools - Set of Six
1
Fine Line Tape
1
marks curves better than painters tape
Foam Brush - 2" Disposable :: 2" Foam Brush - Single
12
for varnishing and painting
Foam Roller Covers
4
cut in half; yields four rollers per pack
Interlux Brightsides Paint :: White - Quart
1
for a painted haul
Interlux Pre-Kote Primer :: White
1
apply two coats beneath paint
Interlux Schooner Varnish
1
build up at least three coats for UV protection; two quarts to varnish the entire boat
Japanese Saw 9-1/2"
1
cuts on the pull stroke; trim your rails with this saw
MAS Handy Repair Kit
1
MAS Rapid Cure Mini Kit
1
great for emergency repairs
Plastic Epoxy Spreader
3
Riffler Rasp - 8 piece set
1
16 different rasp heads
Roller Frame 4"
1
Sanding Block
1
Shinto Saw Rasp 9"
1
one of our favorite tools--cuts through cured epoxy goops!
Sliding T-Bevel
1
Spokeshave by Stanley
1
Super-hard Milled Scraper (set of 4)
1
great for removing uneven epoxy without resorting to the sander
Waterstone
1

X - Close Window