mill creek bulkheads

 building a 16.5 mc from a kit i wired the hulll together that all looks good but the bulkheads arent even close to fitting , im putting the foward bulkhead at 48"form the bow and its an inch and 1/2 gap to the bilge panels at the bottom , the aft bulkhead doesnt match up either . what the heck am i doing wrong?


3 replies:

« Previous Post       List of Posts       Next Post »

RE: mill creek bulkheads

I built an MC 16.5 back in winter/spring, 2010 and I remember the bulkheads were not a perfect fit.  I don't remember exactly what I did, but the boat turned out just fine. 

RE: mill creek bulkheads

NO ! these arent even close ive got an inch on the bottom and an 1  1/12 " gap at the bilge panels  . somethings definetly wrong

RE: mill creek bulkheads

Well, send us an email or get in touch and we'll figure out what's going on.

« Previous Post     List of Posts     Next Post »


Please login or register to post a reply.