Builders' Forum |
|
↓ Scroll to Last Comment ↓ | Forum Guidelines | Builders' Forum | RSS |
Pre-Coating panels / bulkheads on Tandem Wherry
I am considering pre-coating the inside of panels 3, 4, and 5 with 2-3 coats of epoxy (no cloth) and sanding to 220 prior to assembly and in prep for varnish on the Tandem Wherry. Also considering pre-coating the bulkheads.
CLC tech support did not encourage the panels saying they may be too stiff, but OK'ed the bulkheads.
Anyone had any experience with either?
No replies have been added to this post.