Please login or register to post to this forum.

Chesapeake Light Craft Forum


Welcome to the CLC boatbuilding forum!  You’ll need to log in to post on this forum.  Click here to get started if you aren’t already logged in.

 

First posted in 1999, the CLC Builder’s Forum is for builders of CLC's many boats as well as others building wooden boats. The amateur and professional builders reading and posting on this forum have an enormous wealth of knowledge drawn from an amazing variety of boatbuilding projects.  This forum is moderated by the CLC staff.  Please observe our guidelines.

Click here for help on including photos in your forum posts.

  • Looking for CLC's Used-Boats-For-Sale section? Click here. 
  • Looking for the CLC Teardrop Camper Forum? Click here.

 

Title: Last Post By: Posts:
Fixing new varnish coat with runs shalpern » Thu, March 23 » 7:02 PM 1
BLBF Dan Thaler » Thu, March 23 » 6:50 PM 1
Norwegian push pull tiller mod (Peapod in this... nate C » Thu, March 23 » 4:52 PM 10
CLC powerboat pulling a hydrofoil board Bubblehead » Thu, March 23 » 2:28 PM 8
NE Dory -- Crack through Okume at bow JoeRow » Thu, March 23 » 2:25 PM 1
Peeler Craft Gordon, Marvin » Thu, March 23 » 10:46 AM 1
Peeler Craft Gordon, Marvin » Thu, March 23 » 10:46 AM 1
Is this what varnish that is going bad looks like? Bubblehead » Thu, March 23 » 9:06 AM 5
Trailex 250 trailer tire size change jtcostanz » Wed, March 22 » 6:13 PM 3
NE Dory - stitch fitup before gluing Silver Salt » Mon, March 20 » 3:46 PM 3
Shearwater panels damaged in transit—repair? RexNemo » Mon, March 20 » 3:00 PM 7
Invisible Hatch cover = WD 12 Grumpy » Sun, March 19 » 1:33 PM 3
Petrel Play S&G hatch rings vs varnishing tcs1024 » Fri, March 17 » 1:04 PM 1
Mill Creek 16.5 cockpit cover BetsyYing » Thu, March 16 » 11:18 AM 2
Fiberglassing a canoe paddle samuelsjohns » Tue, March 14 » 4:42 PM 2
slightly off-topic: using FSA to buy supplies Bubblehead » Tue, March 14 » 11:51 AM 1
Schooner Gold vs Schooner Tedski » Sun, March 12 » 11:44 AM 1
John's new blog post spclark » Sun, March 12 » 9:31 AM 1
Petrel Play S&G Bulkhead fit tcs1024 » Fri, March 10 » 4:58 PM 4
Deck form trouble That Mike » Fri, March 10 » 2:37 PM 2
sassafras 16 kurlanny » Fri, March 10 » 10:42 AM 9
HIN (Hull Identification Number) spclark » Wed, March 8 » 8:30 PM 5
interior hull cracked Shiso » Mon, March 6 » 9:33 PM 10
Fitting an electric motor to the Northeaster Dory Gramps » Fri, March 3 » 8:20 AM 13
Installing deck forms hspira » Thu, March 2 » 9:11 PM 3
Wales on Tenderly Dinghy Dream Chasers » Thu, March 2 » 4:22 PM 3
Staining plywood to hide puzzle joints? Jharr » Thu, March 2 » 7:30 AM 5
Sandwich Construction hspira » Wed, March 1 » 9:06 PM 1
Still having problems fitting Eastport Nesting... S/V YKNOT » Wed, March 1 » 6:53 PM 5
Lug rig: lacing to spars best practices? Toxophilitest » Wed, March 1 » 6:20 PM 6

View All Messages

Homebuilt Boat Bazaar

Welcome to Chesapeake Light Craft's Homebuilt Boat Bazaar. This is a free service of Chesapeake Light Craft for the legions of builders who want to build another boat, but need to make room in their garage first.

Just as the title suggests, the Homebuilt Boat Bazaar is off limits to for-profit builders and businesses. The service is restricted to amateur boatbuilders and homebuilt boats (whether you personally built the boat or not). Chesapeake Light Craft will review all submissions and reserves the right to reject listings.  Note: Listings older than 90 days will be purged from the Bazaar.  Feel free to post your listing again.

Chesapeake Light Craft has not inspected any of the boats listed for sale and does not make any express or implied warranties regarding the accuracy of the ad or safety of the boat for sale. Caveat Emptor.


Note for sellers: There is a scam going around which targets anyone selling costly items online. A buyer will contact you who will know nothing about boats or what you're selling. They will offer to pay you MORE than your list price, but will ask you to send them a check back in the amount of the difference. (Their check will bounce, if it arrives at all, and you lose the difference.) Use your common sense and avoid this scam and its variations.

Click here for help on including photos in your forum posts.  

 

Title: Last Post By: Posts:
NW Dory, Lug rigged kit for sale CapnBilalBubbles » Thu, March 23 » 10:37 PM 2
Chesapeak 17 and Chesapeake 17LT kits for sale Jnystrom » Thu, March 23 » 8:23 AM 1
For sale piantesodi drop in rower and dreher... Clog » Tue, March 21 » 12:00 PM 1
Jimmy Skiff 2 kit with sails Christian.O57 » Mon, March 20 » 10:22 AM 2
Rantilla front Rower Rengaw » Thu, March 16 » 3:15 PM 1
$600 Dreher Sculling Oars (Never Used) with... Sam Quick » Sun, March 12 » 10:45 AM 1
$1,500 Partially-Built Annapolis Wherry Tandem... Sam Quick » Sun, March 12 » 10:31 AM 1
Wherry for sale Cannonfire » Wed, March 8 » 8:28 PM 1
CLC 18 Sea Kayak paddlesinpuddles » Mon, February 27 » 4:12 PM 1
Annapolis Wherry For Sale RowBoi » Fri, February 24 » 4:15 PM 1
Tenderly (partially built) and unused SUT-250... CaptCook » Thu, February 23 » 9:39 AM 2
Trailex SUT-250 trailer for sale Kayakagain » Mon, February 13 » 6:20 PM 1
Teardrop Camper building supplies Scheihing, Paul » Tue, January 24 » 12:51 PM 1
Sea Kayaks for sale paddlesinpuddles » Sun, January 15 » 4:19 PM 1

View All Messages

Nesting Expedition Dinghy

Nesting Expedition Dinghy
Prototype Status:  Tested and ready
Kit Status:  Tested and ready
Plans Status:  $49 PDF download
Instruction Manual Status:  170 sequenced photos online
Pricing:  Kit TBD; Plans $49 PDF 

A personal project of mine, this is a unique little boat that will appeal to people who like camping and small boats but don't have a big shop or storage space.  Read the full write-up on this design here, and study high-res drawings here.  Given a smaller audience, this might be one where we experiment with downloadable plans and an online, wiki-style manual.

Title: Last Post By: Posts:
Building Photos 1-5 Shras » Sat, November 7 » 6:28 AM 1
Building Photos 6-10 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 11-15 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 16-20 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 21-25 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 26-30 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 31-35 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 36-40 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 41-45 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 46-50 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 51-55 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 56-60 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 61-65 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 66-70 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 71-75 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 76-80 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 81-85 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 86-90 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 91-95 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 96-100 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 101-105 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 106-110 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 111-115 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 116-120 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 121-125 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 126-130 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 131-135 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 136-140 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 141-145 CLC Forum Admin » Tue, April 4 » 10:35 AM 1
Building Photos 146-150 CLC Forum Admin » Tue, April 4 » 10:35 AM 1

View All Messages

CLC Ultralight Dinghy


CLC Ultralight Dinghy

Prototype Status:  Tested and ready
Kit Status:  Tested and ready
Plans Status:  In progress
Instruction Manual Status:  A wiki-style online manual is below.  This will evolve, with more detail added.
Pricing:  Complete kit $855; Wood-parts-only kit $525, plans and patterns TBD

A personal project of John Harris, this is a 40-pound dinghy with a 425-pound payload.  John's discussion of the design, with drawings and photos, is here.  Dimensions are 72-1/2" x 40-1/2".  Light and nimble, this is a good solution for someone with limited dinghy storage space, and the need to carry the boat solo across the parking lot.  The boat rows well with six-foot oars and can carry two adults and a child in calm conditions.  One person plus groceries could row a long way across a rough anchorage.  

This is a rowing dinghy whose primary design brief is extremely light weight and compact storage. No provision for outboard power or a sailing rig exists or will be made available.  Drop us a line if you have questions about this new design!CLC Ultralight Dinghy

Title: Last Post By: Posts:
Introducing the CLC Ultralight Dinghy mbiq » Sat, August 29 » 3:40 PM 1
1. Laminating the Skeg shepshepard » Sat, December 5 » 5:47 PM 1
2. Gluing the Doublers CLC Forum Admin » Thu, August 27 » 1:55 PM 1
3. Cleaning up Epoxy Squeeze-out CLC Forum Admin » Thu, August 27 » 1:58 PM 1
4. Pre-coating Transoms, Frame, and Stringer shepshepard » Sun, December 6 » 3:20 PM 1
5. Rounding Over the Transoms CLC Forum Admin » Thu, August 27 » 2:07 PM 1
6. Finished Transom Handles CLC Forum Admin » Fri, August 28 » 10:25 AM 1
7. Hull Parts Ready for Assembly DICKDOWDELL » Fri, December 28 » 2:23 PM 1
8. Wiring #1 Panels CLC Forum Admin » Fri, August 28 » 10:28 AM 1
9. #1 Panels Stitched in Place CLC Forum Admin » Fri, August 28 » 10:31 AM 1
10. Adding the Center Frame CLC Forum Admin » Fri, August 28 » 10:35 AM 1
11. Aligning Mortises and Tenons CLC Forum Admin » Fri, August 28 » 10:38 AM 1
12. Adding the Longitudinal Stringer CLC Forum Admin » Fri, August 28 » 10:39 AM 1
13-14. Stitching Stringer to Bottom Panel CLC Forum Admin » Fri, August 28 » 10:44 AM 1
15. Adding Bow & Stern Transoms CLC Forum Admin » Fri, August 28 » 10:46 AM 1
16-17. Dropping Stern Transom into Place CLC Forum Admin » Fri, August 28 » 10:48 AM 1
18. Ready for the Side Planks CLC Forum Admin » Fri, August 28 » 10:50 AM 1
19. Adding the #2 Panels CLC Forum Admin » Fri, August 28 » 10:51 AM 1
20. Adding the #3 Panels CLC Forum Admin » Fri, August 28 » 10:52 AM 1
21. Bow Stitching Detail CLC Forum Admin » Fri, August 28 » 10:54 AM 1
22. Tightening the Wires CLC Forum Admin » Fri, August 28 » 10:55 AM 1
23. Ready for LapStitch Joint Panels (4, 5, 6) CLC Forum Admin » Fri, August 28 » 10:57 AM 1
24-27. Stitching on Panels 4, 5, 6 CLC Forum Admin » Fri, August 28 » 11:02 AM 1
28-29. Adding Stitch Holes CLC Forum Admin » Fri, August 28 » 11:04 AM 1
30. Completed Assembly CLC Forum Admin » Fri, August 28 » 11:07 AM 1
31. Tack-Welding the Hull CLC Forum Admin » Fri, August 28 » 11:08 AM 1
32-33. Transom Tack-Welds CLC Forum Admin » Fri, August 28 » 11:10 AM 1
34-35. Tack-Welding the Hull Seams with CA Glue CLC Forum Admin » Fri, August 28 » 11:12 AM 1
36-37. Removing the Wires CLC Forum Admin » Fri, August 28 » 11:14 AM 1
38-39. Epoxy Fillets CLC Forum Admin » Fri, August 28 » 11:16 AM 1

View All Messages

Sketchbook

Sketchbook

There are no posts in this category

View All Messages