Re: Deck Trimming-16.5 MC

Posted by Chris J. on Mar 24, 2008

I've used a saw on previous kayaks but found the quickest and cleanest method is using a router with a 3/8" bearing flush trim bit. It trims right to the edge with no danger of gouging the hull. Bit was about 20 bucks at Home Depot. You'll have the whole deck perfectly trimmed in about 5 minutes.

In Response to: Deck Trimming-16.5 MC by Tom P on Mar 23, 2008

Replies:

• Re: Deck Trimming-16.5 MC by Kurt Maurer on Mar 24, 2008
  • Dom Gorie by CLC on Mar 27, 2008