Scarfing Alignment

Posted by Neil Moomey on Feb 7, 2008

I made the false assumption my wall was straight when I scarfed up my Skerry kit planks by measuring from the wall. Now I realize the wall was concave by 1/8 inch so the planks are a bit flatter than they should be. For some reason I started with the middle plank realized my error and decided to scarf the first plank (garboard) offset by 1/16 inch to split the difference. Will this be a show stopper? Hopefully stitchlap is forgiving.

Neil

Replies:

No Replies.