Builders' Forum Archives |
MC mast partner question
Posted by Mike on Dec 6, 2007
Hi Folks, I am nearing completion of an MC13, I am working on the coaming and mast partner. I need to verify the diameter of the mast itself so I can drill the appropriately sized hole. I am thinking the drilled hole is around 1.5 inches based on my interpretation the blueprints.
Advice from folks who have built the sail option would be most appreciated.
Thanks in advance, Mike
Replies:
- Re: MC mast partner quest by CLC on Dec 6, 2007
- Re: MC mast partner quest by Mike on Dec 6, 2007