Re: coaming on Mill Creek

Posted by Steve Miller on Nov 13, 2007

I used 5/16 x 1/2 mahogany with an oak nose block. I like the look of the slightly thicker than spec trim. It is laminated on the outside of the coaming.

In Response to: Re: coaming on Mill Creek by Chris J. on Nov 12, 2007

Replies:

• Re: coaming on Mill Creek by Steve Miller on Nov 13, 2007
  • Re: coaming on Mill Creek by Jim Raffini on Nov 15, 2007
    • Re: coaming on Mill Creek by Steve Miller on Nov 24, 2007