Re: About to start 3 SH

Posted by douglas frost on Jun 15, 2007

hi jon,

i recently built a shearwater 17 at capeboatworks (australia). you do need to bevel the edges as per the instructions. don't worry too much about messing up the edges - even a complete woodworking novice like myself was able to do a reasonable job.

both myself and another guy building a shearwater used more than the supplied amount of epoxy in the kit - put that down to bad technique and mixing up too much to use then having to throw it away...

have fun on the production line!

regards, douglas

In Response to: About to start 3 SH by Jon T on Jun 15, 2007


No Replies.