Builders' Forum Archives |
Fiberglass "Seam"
Posted by Tim Clark on May 21, 2007
When glassing my hull someone convinced me to put a second fiberglass "strip" along the bottom to "manage abrasion". Two coats of epoxy later (thin coats - rolled on) the fiberglass has wetted out nicely except for the edge, which still shows.
Do I add on some more epoxy along this "showing" edge, do I sand, or a combination of both?
Thanks for your help.
Tim Clark
Replies:
- Re: Fiberglass "Seam" by Jim E on May 22, 2007
- Re: Fiberglass "Seam" by Mike on May 22, 2007