Re: John's Sharpie deck m

Posted by Ron Paro on May 2, 2007

Randy, I have no experience with a John's Sharpie, but I have built the Jimmy Skiff with a slightly extended deck, and compound curved deck rail which serves as a coaming (splash rail).

This link is to the page in my construction blog which shows the deck and the rear seat compartment. I used a round deck plate hatches in the floatation compartments.

I know it's not the same as on the sharpie, but thought it may give you some additional ideas.

http://bp3.blogger.com/_XuaT2XHyCMw/RfS33TtIrqI/AAAAAAAAALs/Aei79CegaXI/s1600-h/IMG_2979.JPG

http://jimmyskiff.blogspot.com/2007/03/compound-curve-lamination-mast-step-and.html

In Response to: John's Sharpie deck mods by Randy on May 2, 2007

Replies:



 



Follow us on Instagram: @clcboats & @clcteardrop