Re: epoxy

Posted by Richard on Mar 1, 2007

In the past, I have built a stripbuilt wherry, called the Cosine Wherry, and now a CLC 17 LT with System 3 epoxy,(not silver tip), and have had no problems with blushing or laminating. If it darkens the plywood a little it is a good thing; like putting on a natural stain. The medium hardner gives me a good ammount of working time before the mix starts to go off in my 58 degree shop. I'll be sticking with this. Works for me.

In Response to: Re: epoxy by Jeremy on Mar 1, 2007