Re: Another question

Posted by LeeG on Feb 7, 2007

this is one of those things that make one experiment on the next kayak as 9oz tape doesn't fold or take a corner well. Cutting a bias strip of 6oz cloth will make a neat glassed in area without raising wrinkled bubbles. I made a 1/2" wide fillet with 3" wide bias cut strip over it. If you pre-wet the wood then lay the dry 6oz cloth on then dab with a brush it won't stretch the bias strip out on application.

Regarding how far, up to the endpour.

In Response to: Re: Another question by George P on Feb 7, 2007

Replies:

No Replies.