Re: More progress pics

Posted by Jim E on Jan 19, 2007

Looking good, Mike.

I believe the standard CLC scheme is one layer of 6-oz glass on the outside. Add more if you think you will need it. I'm building an Arctic Hawk which uses two layers of 4-oz on the bottom, one on the sides, so all sorts of variations are possible.

I had a similar hose dropping-off problem, but my stayer putter does not infringe on your patent. It consists of some masking tape wrapped around the end of the pipe, ensuring a tight fit. Still fits the other vacuum tools, too.

In Response to: Re: More progress pics by Mike on Jan 19, 2007


No Replies.