End Pour vs dam method

Posted by Chris on Sep 26, 2006

Reading through recent message chains, there seems to be a new way to do end pours in a Chesapeake 17(dam method). I'm finally getting back to finishing my kayak after a 3 year break due to work. I am at the stage of washing the blush off the hull after the glass and first coat of epoxy went on three years ago. The deck hasn't been epoxied yet but it's sanded. When I get to it, how can I do the end pours so I don't start it on fire as the epoxy cures in such a large quantity? My retailer says East epoxy doesn't have a slow cure hardener.

Replies:

• Re: End Pour vs dam metho by Alan Speakman on Sep 26, 2006
  • Re: End Pour vs dam metho by Laszlo on Sep 26, 2006
    • how would you sand ?? by Charlie Jones on Sep 26, 2006
      • Re: how would you sand ?? by Tim on Sep 26, 2006
        • you can buy by Charlie Jones on Sep 26, 2006
      • Re: how would you sand ?? by Alan Speakman on Sep 26, 2006
• Pour vs dam vs wood block by Mike Hanks on Sep 26, 2006
  • Re: Pour vs dam vs wood b by Jim E on Sep 26, 2006
    • Re: Pour vs dam vs wood b by Mike on Sep 27, 2006
• Re: End Pour vs dam metho by Darryl on Sep 26, 2006
• Deck is already on? by Jim E on Sep 26, 2006
  • Re: Deck is already on? by Mike on Sep 27, 2006
• Re: End Pour vs dam metho by LeeG on Sep 26, 2006
  • Re: End Pour vs dam metho by Tim on Sep 28, 2006
    • been going on for years by LeeG on Sep 28, 2006
      • Re: been going on for yea by CLC on Sep 28, 2006
        • my assumption is wrong by LeeG on Sep 28, 2006
          • Re: my assumption is wron by Laszlo on Sep 28, 2006