Builders' Forum Archives |
Re: Paddle Park
Posted by mike noeske on Jul 23, 2006
Kurt came up with or passed along (I'm guessing, came up with) a method, where you roll the sleeve back a bit abd then trim the elastic cord. Roll the sleeve back over it. Apply a little heat to the end of the sleeve to stop it from fraying/unraveling.
Used the method yesterday on my WR18 to fit 1/4 dia bungie thru a 1/4 inch hole. Works great. Tho, don't know how much of a smaller hole than the cord diameter it would work with. Guessing that using Kurt's method and stretching the cord some would get it thru a smaller hole.
Mike
In Response to: Re: Paddle Park by Laszlo on Jul 23, 2006
Replies:
- Re: Paddle Park by Jim S on Jul 23, 2006
-
Re: Paddle Park by Kurt Maurer on Jul 23, 2006
- Re: Paddle Park by rod h on Jul 29, 2006
-
Re: Paddle Park by Kurt Maurer on Jul 23, 2006