Builders' Forum Archives |
Bending the deck
Posted by Bill Lapcevic on Jul 6, 2006
Hi,
I've scarfed the deck together for my CH 17LT. I'm ready to put it on the hull now..but...
I tried to bend it manually over the shears and the deck beams and found that is was VERY reluctant to bend to the right shape except in between the bulkheads. on the bulkheads and fore and aft, it just doesn't want to bed...it just plain flattens out. Any suggestions?
Replies:
- Re: Bending the deck by Robert Hancock on Jul 6, 2006
-
Re: Bending the deck by Robert Hancock on Jul 6, 2006
- Re: Bending the deck by Bill on Jul 6, 2006
- Re: Bending the deck by Robert Hancock on Jul 8, 2006
- Re: Bending the deck by Bill on Jul 6, 2006
-
Re: Bending the deck by Robert Hancock on Jul 6, 2006
- Re: Bending the deck by Doug Judd on Jul 6, 2006
- Re: Bending the deck by CLC on Jul 6, 2006
- drawing conclusions by LeeG on Jul 6, 2006
-
Re: drawing conclusions by Bill on Jul 6, 2006
- hint by LeeG on Jul 6, 2006
- Re: drawing conclusions by Laszlo on Jul 6, 2006
-
Re: drawing conclusions by Bill on Jul 6, 2006
- Simple as crab cakes by BobE on Jul 6, 2006
-
Re: Simple as crab cakes by Laszlo on Jul 7, 2006
- Re: Simple as crab cakes by BobE on Jul 7, 2006
-
Re: Simple as crab cakes by Laszlo on Jul 7, 2006
- Re: Bending the deck by Mic on Jul 6, 2006
- Re: Bending the deck by Russ on Jul 6, 2006