Re: Shearwater/deck insta

Posted by Darryl on May 30, 2006

Al, I just finished my S17 and what I did was put epoxy on the last foot or so of hull before I put the deck on. Afterwards, using a headlamp I was able to put in my epoxy fillet from the inside using two different diameter dowels. The larger with 3 eyelets and the syringe attached. The other rides inside the eyelets and acts as the plunger. I then used a broom stick or similar diameter to smooth the fillet -- always pull toward you. Worked pretty well.

In Response to: Shearwater/deck install by Al Freeman on May 30, 2006