Builders' Forum Archives |
Rudder & Mill Creek 16.5
Posted by Darrell on Feb 18, 2006
We are planning on building a Mill Creek 16.5 later this year. When I built the Ches 16 for my wife, she insisted on a rudder. I installed the Feathercraft Single Rudder Kit sold by CLC. After many seasons of paddling, the rudder has touched the water but once or twice. Of course, I try and refrain from pointing that fact out. ;-)
I'd like to take the rudder off the Ches 16 and use it on the MC 16.5. Is the single rudder adequate for the MC 16.5 that will only be paddled (not sailed)?
Thanks, Darrell
Replies:
- Re: Rudder & Mill Creek 1 by dave on Feb 18, 2006
- Re: Rudder & Mill Creek 1 by CLC on Feb 19, 2006
- Rudder for Chesapeake 17 by Jim Raffini on Feb 20, 2006
-
Re: Rudder for Chesapeake by LeeG on Feb 20, 2006
- Re: Rudder for Chesapeake by Jim Raffini on Feb 21, 2006
- Re: Rudder for Chesapeake by CLC on Feb 21, 2006
- that's the one by LeeG on Feb 21, 2006
- Re: Rudder for Chesapeake by CLC on Feb 21, 2006
- Re: Rudder for Chesapeake by Jim Raffini on Feb 21, 2006
-
Re: Rudder for Chesapeake by LeeG on Feb 20, 2006