Re: Countersink Bolts

Posted by Dave on Oct 22, 2005

I used the adhesive base stainless steel studs like the ones that come in the kit, but I bought them from a hardware store. I set them in thickened epoxy and put two lyers of glass tape over them. It worked great and will probably last forever. I don't see that boat anymore as it belongs to an old girlfriend, but I hear it is doing just fine!

I will use this method on my next boat.

-Dave

In Response to: Re: Countersink Bolts by Eric Swenson on Oct 14, 2005

Replies:

No Replies.