Re: flat aft deck on CH14

Posted by Jim Robinson on Oct 11, 2005

Yes, I see what your saying. I continued the curve on the shears to the rear end pour, but from there to the transom (3 or 4 inches) its flat. So its flat there, curved at the bulkhead, it has to transition in between. I still think a deck beam of the proper radius near the transom would have kept a more or less constant radius to the rear, although it would not have met the flat transom of course.

I still think I'll need to adjust the hatch cover radius slightly, but I'll leave the deck alone. Thanks for your response,

Jim

In Response to: Re: flat aft deck on CH14 by LeeG on Oct 11, 2005

Replies: