Status report & delay

Posted by Mulepilot on Oct 9, 2005

I rolled five thin coats of epoxy onto the hull of my CH17LT and things look pretty good. Have all the fabric filled up, everything is smooth. There are a few small runs but nothing that bad. Picked up a carbide paint scraper at Lowes so I'll be ready for that. I'm going to go ahead and install the deck before I go back and work more on the hull. BUT first I have to move the fiancee out from CT to CA. So it'll probably be about a month before I do much more work. Just wanted to thank everyone here for all the great advice.

Talk to ya later,

Bryan PS Can't wait to get this thing in the water!

Replies:

• Re: Status report & delay by Mike D on Oct 10, 2005