Builders' Forum Archives |
Re: Wet seat
Posted by terry on Sep 13, 2005
I carve my own seats and install a small shelf under them: an 8" wide by 12" long piece of 6mm )or you could use 4mm and glass it) installed along the keel with a 12" piece of 1/2" by 3/4" to support it in the middle. Keeps the foam seat flatter, makes for a good platform for velcro and allows the water to slosh underneat without drenching the seat.
terry
In Response to: Wet seat by Chris F on Sep 13, 2005
Replies:
No Replies.